CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Our mission is help customers enjoy premium cabinetry at the lowest prices possible. By buying direct from the RTA Store, you cut out the middle man and save all the extra markups that come along the way.
The RTA Store will replace or repair kitchen cabinets that have been subject to defects in materials and workmanship from the date of purchase for a period of 20 years. Warranty is limited to the original purchaser, for residential applications only. This warranty is expressly limited to repair or replacement of the defective part at the discretion of The RTA Store, and does not include labor for removal or replacement.
Providence White
Shipped in 5-15 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Providence White collection are the perfect cabinets for any style home. The white finish provides a clean, crisp look, perfect for the modern, transitional, country or traditional home! With standard features like soft closing drawers and doors, dovetailed drawer boxes and plywood box construction, these cabinets will last for generations to come!
See this finish in our 3D Room Visualizer
This finish is available in both Ready to Assemble and Pre-Assembled
| Shipping Time: |
Shipped in 5-15 business days |
| Style: | Recessed |
| Face Frame: | 3/4" Solid Birch |
| Door Frame: | 3/4 Solid Birch |
| Door Center: | MDF/HDF (to avoid cracking/warping) |
| Sides: | 1/2" A-Grade plywood with wood veneer |
| Top & Bottom (Wall): | 1/2" A-Grade plywood with wood veneer |
| Bottom (Base): | 3/8" A-Grade plywood with wood veneer |
| Back Panel: | 1/2" Picture Frame Recess Style |
| Shelves: | 3/4 " A-Grade plywood with wood veneer |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish. |
| Drawer Glides: | Undermount, full extension with soft closing feature |
| Base Corner Supports: | Wood corner brackets with wood I-beam construction |
| Overlay: | Full with Butt doors |
| Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
| Cabinet Interior: | Matches door finish |
| Center Stile: |
No center stile on cabinetry 24"W to 36"W |
| Assembly Method: | Steel Clip |
| Finish: | Waterborne UV Finish |
| Toe Kick: | 1/2" Plywood (sides of the toe kicks will be unfinished) |
| Installation Rail: | 1/2" Plywood |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| KCMA Compliant: | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This) |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Design Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Assembly instructions for all cabinets- schematic drawings
The following cabinet lines have similar specifications and door profile.
Frequently Asked Questions About Providence White Cabinets
I am very happy with my new kitchen cabinets. We ordered the assembled providence white cabinets. We had a few issues with minor damage and defects while assembly, however the issues were rectified in a timely manner and new pieces were shipped out to me ASAP. The cabinets are good quality and gorgeous. The assistance I received from Brenda in the returns/exchange department was excellent, she went above and beyond to make sure things were corrected and I was happy. I highly recommend these cabinets.
I installed these cabinets in my kitchen a year ago and have loved and enjoyed them ever since. Would highly recommend!
Came as promised, a nice looking cabinet
Would have liked the carrier to call me 1/2 hour before getting there as I requested from them but they didn’t.
Easy process! Went well, except crown molding.
Login and Registration Form