CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Our mission is help customers enjoy premium cabinetry at the lowest prices possible. By buying direct from the RTA Store, you cut out the middle man and save all the extra markups that come along the way.
The RTA Store will replace or repair kitchen cabinets that have been subject to defects in materials and workmanship from the date of purchase for a period of 20 years. Warranty is limited to the original purchaser, for residential applications only. This warranty is expressly limited to repair or replacement of the defective part at the discretion of The RTA Store, and does not include labor for removal or replacement.
Hudson Ember features a warm wood stain and full-overlay recessed-panel doors. Cabinets ship pre-assembled; accessory installation and post-delivery adjustments may still be needed. Exposed sides require skins or decorative panels purchased separately.
6-way adjustable, concealed, European soft-close hinges
Cabinet interior:
UV Coated Natural Interior (Prepped-for-glass cabinets will be finished to match the cabinet fronts)
Center stile:
None (unless listed in the cabinet description)
Assembly method:
Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats - not already installed on the cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Glued, clips will not be used
Finish:
7 step, acid-catalyzed finish process with a UV coating.
Toe kick:
1/2" plywood
Installation rail:
None
Wall cabinet bottoms finished (exterior):
Yes (just bottom panel, edges of side and back panel and recessed area is unfinished)
CARB compliant:
Yes
Door hinges:
Doors come pre-drilled for the hinges, the face frame has marks where to drill and the customer chooses Right or Left during assembly.
Toe kicks included with base cabinets:
Yes, but there will be a small gap when two cabinets are side by side, so the TKC (8' toe kick) is needed if cabinets are next to each other.
Side panels finished:
Yes
Installation/design note:
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.
Assembly
All wall, base, vanity, pantry and oven cabinets will be shipped Pre-Assembled and ready to install! There will need to be some installation on site of certain accessory items. These types of items include but are not limited to: fillers, moldings, toe kicks, some glass doors/shelves/inserts and roll out trays, panels, decorative/dummy doors, valances, soft close door adapters, corbels, decorative legs/posts and accents. It is not uncommon to have to adjust drawers or doors on assembled cabinets after delivery, as parts can sometimes shift in transit.
The cabinets will be assembled with either staples from the back, or pin nails from the sides. Exposed cabinet sides will need skins or decorative panels applied (purchased seprately) to hide the pin nail holes that will be visible. The face frame is attached to the cabinet box using staples to keep it in place, and then glue is added for reinforcement.
Frequently Asked Questions About Hudson Ember Cabinets
What should I know about Hudson Ember pre-assembled kitchen cabinets?
Hudson Ember cabinets are pre-assembled recessed-panel transitional kitchen cabinets with a deep ember-brown finish. The cabinet boxes arrive assembled; leveling, fastening, trim, and accessory installation are completed on site.
What does the Hudson Ember finish look like on pre-assembled cabinets?
On pre-assembled Hudson Ember cabinets, the finish is an ember brown finish. View a sample beside the room's countertops, flooring, backsplash, and wall colors to judge the finish under your actual lighting.
How are Hudson Ember pre-assembled cabinet boxes constructed?
Pre-assembled Hudson Ember cabinets use 1/2" A-grade plywood sides, wall cabinet tops and bottoms, base cabinet bottoms, and a 1/2" full back. A 3/4" x 1-3/4" birch face frame supports the box, with adjustable 3/4" edge-banded shelves and 1/2" plywood toe kicks completing the listed construction.
How are the doors and center panels in Hudson Ember pre-assembled cabinets constructed?
Premium HDF is used for both the door frame and center panel on pre-assembled Hudson Ember cabinets to help limit cracking and warping. The finish is applied through a 7-step, acid-catalyzed process and protected with a UV coating.
Which soft-close hinges and drawer glides are included with Hudson Ember pre-assembled cabinets?
Soft-close hardware is included with pre-assembled Hudson Ember cabinets: undermount, full-extension soft-close drawer glides and concealed European soft-close hinges with 6-way adjustment.
What is the drawer-box construction in Hudson Ember pre-assembled cabinets?
Pre-assembled Hudson Ember drawers combine 5/8" solid-hardwood boxes, dovetail joinery, and 5/16" plywood bottoms. The drawer fronts use 5-piece construction.
Are Hudson Ember pre-assembled cabinets CARB Phase 2 compliant?
Yes. The pre-assembled Hudson Ember collection is CARB Phase 2 compliant.
Do Hudson Ember cabinets arrive assembled, and what installation work remains?
Yes. Hudson Ember pre-assembled cabinets ship pre-assembled and ready for normal cabinet installation. The cabinet boxes arrive assembled, but fillers, moldings, toe kicks, panels, roll-out trays, decorative pieces, glass components, alignment, leveling, and final installation work may still need to be completed on site.
Can I order a sample door for Hudson Ember before buying pre-assembled cabinets?
Yes. Sample doors for Hudson Ember can be ordered before purchasing the full pre-assembled cabinet line. Compare the sample with your countertops, flooring, backsplash, and wall colors in the room where the cabinets will be installed.
What warranty coverage comes with Hudson Ember pre-assembled cabinets?
Pre-assembled Hudson Ember cabinets come with The RTA Store's 20-year limited residential warranty against defects in materials and workmanship for the original purchaser, subject to the full warranty terms.
What wall cabinet sizes and configurations are available in Hudson Ember pre-assembled cabinets?
Hudson Ember pre-assembled wall cabinets provide upper storage in multiple widths and heights depending on the current assortment. Standard wall cabinets are commonly 12 inches deep, while refrigerator, hood, and other specialty cabinets may use different depths. Check the exact SKU dimensions and current Hudson Ember offerings for corner, glass-ready, open, deep, or other specialty wall cabinets. The cabinet boxes arrive assembled and are installed on site.
How do I choose the right Hudson Ember pre-assembled wall cabinet height and depth?
Base the Hudson Ember wall-cabinet layout on finished room measurements, including ceiling height, soffits, backsplash clearance, windows, refrigerators, range hoods, and other appliances. A 12-inch depth is common for standard upper cabinets, but specialty depths vary. Because Hudson Ember pre-assembled boxes arrive built, also confirm doorway, hallway, stair, elevator, and installation clearances for the exact cabinet dimensions.
What types of Hudson Ember pre-assembled base cabinets can I use in a kitchen?
The Hudson Ember pre-assembled base-cabinet assortment can include standard door-and-drawer bases plus specialized configurations when offered, such as drawer bases, sink bases, corner cabinets, tray bases, or other functional units. The appropriate mix depends on appliances, sink placement, storage priorities, and available wall space. Use the current Hudson Ember product listings to confirm exact cabinet types and widths.
What are the standard dimensions for Hudson Ember pre-assembled base cabinets?
Standard kitchen base cabinets are typically about 34-1/2 inches high and 24 inches deep before the countertop, with width determined by the individual SKU. Sink bases, corner units, drawer bases, and specialty Hudson Ember cabinets can differ. Plan from the exact product dimensions when calculating fillers, appliance openings, countertops, and clearances, and account for the larger handling footprint of a cabinet that arrives pre-assembled.
What are Hudson Ember pre-assembled tall and pantry cabinets used for?
Hudson Ember pre-assembled tall cabinets create full-height storage for pantry goods, household supplies, and, where compatible appliance cabinets are offered, ovens or microwaves. They are useful when a kitchen needs more vertical storage without increasing countertop area. Available heights, widths, depths, rollout options, and appliance configurations vary by SKU, so the design should be based on the exact Hudson Ember tall cabinet selected.
How do I size a Hudson Ember pre-assembled pantry or tall cabinet?
Measure the ceiling height and the full installation path before selecting a Hudson Ember pre-assembled tall cabinet. Common kitchen tall-cabinet heights include 84, 90, and 96 inches, and many pantry cabinets are approximately 24 inches deep, but product dimensions vary. Allow for crown molding, ceiling irregularities, door swing, adjacent appliances, and enough room to carry and stand the assembled cabinet in place.
Which Hudson Ember accessories help complete a pre-assembled cabinet installation?
A finished Hudson Ember installation may use matching fillers, finished panels, toe kicks, moldings, decorative end panels, touch-up materials, or other collection-specific accessories. These pieces address wall gaps, exposed cabinet sides, cabinet bases, and transitions at ceilings, islands, and appliances. Accessory availability varies, so select pieces intended for the Hudson Ember collection and the exact layout.
When should I order Hudson Ember panels, fillers, molding, and toe kicks for a pre-assembled installation?
Include Hudson Ember finishing pieces in the cabinet plan before the order is placed. Fillers can provide wall and door clearance, panels finish exposed sides, toe kicks cover the cabinet-base area, and molding completes upper transitions. Ordering these items with the pre-assembled cabinets helps keep finish coordination and quantities aligned with the final design instead of discovering missing trim during installation.
Can Hudson Ember pre-assembled cabinets be used for a bathroom vanity?
If vanity cabinets are offered in the Hudson Ember line, they allow the same style and finish to be carried into a bathroom with cabinet boxes that arrive assembled. Select a vanity intended to fit the sink, countertop, plumbing, room width, and storage plan. A matching kitchen base cabinet should not automatically be treated as a vanity; use the specifications and intended application of the actual Hudson Ember vanity SKU.
How do I choose the right Hudson Ember pre-assembled bathroom vanity size?
Measure the finished bathroom space and confirm plumbing, sink type, countertop overhang, doors, drawers, and nearby fixtures before choosing a Hudson Ember vanity. Vanity dimensions can differ from standard kitchen base cabinets, so use the exact product specifications. Because the box arrives assembled, confirm that the vanity can also pass through doors, halls, stairs, or other access points on the way to the bathroom.
What storage accessories work with Hudson Ember pre-assembled cabinets?
Compatible Hudson Ember storage accessories can include rollout trays, waste-bin pullouts, spice organizers, tray dividers, drawer organizers, or other cabinet-specific components when offered. Fit is generally determined by cabinet type, width, opening, and interior dimensions rather than by finish alone. Match each organizer to the exact Hudson Ember cabinet SKU and verify whether it is factory-installed, field-installed, or sold separately.
Should I select Hudson Ember storage accessories before ordering pre-assembled cabinets?
Yes. Plan desired Hudson Ember storage features before the cabinet order whenever possible. Pullouts, rollouts, waste systems, and organizers often require specific cabinet widths or configurations, so storage choices can affect which cabinets belong in the design. Some accessories can be installed later, but confirming compatibility early helps avoid ordering a pre-assembled cabinet that cannot accommodate the desired organizer.
Loading...
Loading product...
SKU:
Product Specifications
Specifications below are for the kitchen cabinet associated with this door sample.
Cabinet specs are subject to change. Measurements are typically converted from metric and may vary by up to 1/4", within industry standards.
36" high wall cabinets with stacked crown molding on top
30" high wall cabinets with 12" high stacker cabinets on top (if available) *please note the total
cabinet height will be 42", crown can only be used if there is enough height above the cabinets to the
ceiling*
Login and Registration Form