$70.00
SKU:
township-rift-oak-sample-door
Quantity:
Typically ships within 1-3 Weeks

Township Rift Oak Sample Door Overview chevron-down

Explore the color and feel of Township Rift Oak with this sample door before choosing your cabinets.

Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day. All samples are refundable!

Shipping & Returns chevron-down

Product Specifications

The specifications below are for the kitchen cabinet associated with this door sample

Sample door shipping time: Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day
Shop this cabinet collection: Township Rift Oak ready-to-assemble cabinets
Township Rift Oak pre-assembled cabinets
Cabinetry shipping time:

Ships in 5-15 Business Days

Style: Slim Shaker
Face frame: 3/4" solid wood
Door frame: 7/8" solid rift-cut white oak, wire-brushed for texture, warmth and clarity
Door center: 3/4" HDF with veneer (wire-brushed for texture, warmth and clarity) (HDF is used to avoid cracking/warping)
Sides: 1/2" veneered plywood with UV finish
Top & bottom (wall): 1/2" veneered plywood with UV finish
Bottom (base): 1/2" veneered plywood with UV finish
Back panel: 1/2" veneered plywood with UV finish
Shelves: 3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips
Base cabinet shelf depth: Full depth
Drawer box: 3/4" solid wood, dovetailed drawer box with 5-piece solid wood 7/8" thick drawer front frame and MDF center panel
Drawer glides: Undermount, 6-way adjustable, full extension, soft close glides, rated up to 50lbs (including the roll outs)
Base corner supports: Wood corner supports and 1/4" plywood I-beams
Overlay: Full
Hinges: Concealed 6-way adjustable soft closing hinges
Cabinet interior: Natural finish (except for certain SKUs with matching interiors, as noted in the cabinet description)
Center stile:

None

Assembly method: Nail/screw/glue
Finish: Natural stain with toner and glaze, then wire brushed. Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning.
Toe kick: 1/2" matching veneered plywood toe kick (highly recommended to use 8' toe kick pieces)
Installation rail: No installation rail due to full 1/2" back
Wall cabinet bottoms finished (exterior): Natural, bottom edges of side panels are unfinished
CARB compliant: Yes
Door hinges: Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R
Toe kicks included w/base cabinets: No, 8' toe kicks are required for base, oven, pantry and vanity cabinets
Side panels finished: No, finished side(s) must be specified from options menu for each sku (except 24" deep wall cabinets, glass wall cabinets, wall open cabinets, microwave wall cabinets, wine cabinets, hoods, pantries, oven and vanity cabinets, which all come with pre-finished sides).
Installation/designer note:

Since the door is 7/8, if a cabinet has a door and is getting installed directly against a wall, deeper cabinet/appliance, or refrigerator panel, it will need to use a clearance strip. Clearance strips will be included with all kitchen orders at no charge, in addition to a diagram and instructions.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*

Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.