$25.00
SKU:
royal-natural-shaker-sample-door
Quantity:
Typically ships within 5-7 Business Days

Royal Natural Shaker Sample Door Overview chevron-down

Preview Royal Natural Shaker's finish and shaker-style door before choosing your cabinets.

Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day. All samples are refundable!

Shipping & Returns chevron-down

Product Specifications

Preview Royal Natural Shaker's finish and shaker-style door before choosing your cabinets.

This listing is for a sample door. The specifications below describe the matching cabinet collection.

Sample Door Shipping Time: Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day
Shop this RTA Style: Shop Royal Natural Shaker RTA cabinets
Cabinetry Shipping Time:

Ships in 3-7 business days

Style: Shaker
Face Frame: 1-1/2" Solid Birch
Door Frame: Solid Birch
Door Center: MDF
Door Frame Width: 3"
Center Panel Beveled Edge: Yes (slight bevel)
Sides: 1/2" plywood
Top & Bottom (Wall): 1/2" plywood
Bottom (Base): 1/2" plywood
Back Panel: 1/4" - 3/8" plywood with a 1/2" frame around the panel for added installation stability and strength
Shelves: 3/4" plywood
Base Cabinet Shelf Depth: 1/2
Drawer Box: Dovetailed, 5/8" drawer box with 5-piece drawer front
Drawer Glides: Undermount, full extension, soft close drawer glides
Base Corner Supports: Wood corner brackets
Overlay: Full
Hinges: Concealed, 6-way adjustable, soft close hinges
Cabinet Interior: UV coated, natural interior
Center Stile:

None

Assembly Method: Dado assembly with a two-carton system: one carton contains the cabinet box components, and the other contains the face frame.
Finish: 7-step acid catalyzed (AC) stain finish process, with an AC top coat
Toe Kick: 1/2" plywood
Installation Rail: 1/2" plywood (1-1/2" narrower than cabinet width)
Wall Cabinet Bottoms Finished (Exterior): Yes (side panel bottom edges will be unfinished)
CARB Compliant: Yes
Door Hinges: Hinged right by default, hinge pilot holes are also pre-drilled on the left side of the face frame. For base cabinets, the hinges from the right side of the face frame can be removed, then screwed into the pilot holes on the left, for a left hinged door. Wall cabinets can have the door flipped around for a left hinge install.
Toe Kicks Included w/Base Cabinets: 1/2" natural toe kick is included, but 8' toe kicks (TK96) need to be purchased separately to finish the toe kick area and cover any gaps from adjacent cabinets. They are recommended to be applied across adjacent cabinets so toe kick seams are not seen.
Sides Panels Finished: Natural, skins will be required to finish exposed sides
Installation/Designer Note:

A 1/2" filler is recommended for full-overlay doors. The door will clear without a filler, but clearance will be minimal.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*

Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.