- SKU:
- Artisan-Oak-Shaker-Sample-Door
Artisan Oak Shaker Sample Door Overview
See the stained finish and Shaker profile of Artisan Oak Shaker in person before choosing your cabinets.
Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day. All samples are refundable!
Shipping & Returns
Product Specifications
The specifications below are for the kitchen cabinet associated with this door sample
| Sample door shipping time: | Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day |
| Shop this style in RTA or assembled: | Shop Artisan Oak Shaker RTA cabinets Shop Artisan Oak Shaker pre-assembled cabinets |
| Cabinet shipping time: | Shipped in 5-15 business days |
| Style: | Shaker |
| Face frame: | 3/4" American oak |
| Door frame: | 3/4" American oak |
| Door center: | 13/16" American oak veneer on MDF/HDF, used to help prevent cracking and warping |
| Sides: | 1/2" A-grade plywood with wood veneer |
| Top & bottom (wall): | 1/2" A-grade plywood with wood veneer |
| Bottom (base): | 3/8" A-grade plywood with wood veneer |
| Back panel: | Wall Cabinets: 1/2" Picture Frame Recess Style, Base Cabinets: 1/2" Full Back |
| Shelves: | 3/4" A-grade plywood with wood veneer |
| Base cabinet shelf depth: | 1/2 |
| Drawer front: | 5-pc recessed panel |
| Drawer box: | Solid wood 17 mm sides (approximately 3/4") with a 3/8" plywood bottom; 21" drawer length. Dovetail construction with a natural finish. |
| Drawer glides: | Undermount, full extension, soft closing glides |
| Base corner supports: | Wood corner brackets with wood I-beam construction |
| Overlay: | Full with butt doors |
| Hinges: | Concealed, 6-way adjustable with a soft-close feature |
| Cabinet interior: | Matches door finish |
| Center stile: | No center stile on cabinetry 24"W to 36"W |
| Assembly method: | Pre-installed, color-coated metal clip that will not tarnish |
| Finish: | Waterborne UV finish |
| Toe kick: | 1/2" plywood (sides of the toe kicks will be unfinished) |
| Installation rail: | 1/2" Plywood |
| CARB compliant: | Yes |
| Door hinges: | Hinged to the right by default. For wall cabinets the face frame can be flipped. For base cabinets unhinge the door, flip it, screw holes on the opposite side to re-hinge, and then fill the original holes (touch up kit can be purchased for this) |
| Toe kicks included w/base cabinets: | Yes |
| Side panels finished: | Yes |
| Installation/design note: | The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Login and Registration Form