$25.00
SKU:
royal-white-shaker-sample-door
Quantity:
Typically ships within 1-3 Weeks

Royal White Shaker Sample Door Overview chevron-down

Compare the color and finish in person before ordering your cabinets.

Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day. All samples are refundable!

Shipping & Returns chevron-down

Product Specifications

Royal White Shaker features a white painted finish and full-overlay Shaker doors.

The specifications below describe the matching kitchen cabinets, not the sample door.

Cabinetry Shipping Time: Ships in 5-7 business days
Sample Door Shipping Time: Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day
Shop this RTA Style: Shop Royal White Shaker RTA cabinets
Cabinetry Shipping Time:
Ships in 5-7 business days
Style: Shaker
Face Frame: 1-1/2" Solid Birch
Door Frame: Solid Birch
Door Center: MDF
Door Frame Width: 3"
Center Panel Beveled Edge: Yes (slight bevel)
Sides: 1/2" plywood
Top & Bottom (Wall): 1/2" plywood
Bottom (Base): 1/2" plywood
Back Panel: 1/4" - 3/8" plywood with a 1/2" frame around the panel for added installation stability and strength
Shelves: 3/4" plywood
Base Cabinet Shelf Depth: 1/2
Drawer Box: Dovetailed, 5/8" drawer box with 5-piece drawer front
Drawer Glides: Undermount, full extension, soft close drawer glides
Base Corner Supports: Wood corner brackets
Overlay: Full
Hinges: Concealed, 6-way adjustable, soft close hinges
Cabinet Interior: UV coated, natural interior
Center Stile:

None

Assembly Method: Cabinet boxes use either dado assembly with metal clips (brackets included) or dovetail assembly, depending on the cabinet. Assembly methods may vary among cabinets within the same order. Wood glue and brad nails are recommended for both methods.
Finish: Sherwin Williams Paint
Toe Kick: 1/2" plywood
Installation Rail: 1/2" plywood (1-1/2" narrower than cabinet width)
Wall Cabinet Bottoms Finished (Exterior): Yes (side panel bottom edges will be unfinished)
CARB Compliant: Yes
Door Hinges: Hinged right by default, hinge pilot holes are also pre-drilled on the left side of the face frame. For base cabinets, the hinges from the right side of the face frame can be removed, then screwed into the pilot holes on the left, for a left hinged door. Wall cabinets can have the door flipped around for a left hinge install.
Toe Kicks Included w/Base Cabinets: Yes, however 8' toe kick (TK96) is recommended to be purchased and applied across adjacent cabinets so toe kick seams are not seen.
Sides Panels Finished: Yes
Installation/Designer Note:

A 1/2" filler is recommended for full-overlay doors. The door will clear without a filler, but clearance will be minimal.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*

Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.