$35.00
SKU:
Portland-White-Sample-Door
Quantity:
Typically ships within 5-15 Business Days

Portland White Sample Door Overview chevron-down

See Portland White’s bright white finish and slim Shaker profile in person before choosing your cabinets.

Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day. All samples are refundable!

Shipping & Returns chevron-down

Product Specifications

The specifications below are for the kitchen cabinet associated with this door sample

Sample door shipping time: Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day
Shop this style in RTA or assembled: Shop Portland White RTA cabinets
Shop Portland White pre-assembled cabinets
Cabinet shipping time:

Ships in 5-15 business days

Style: Slim Shaker
Face frame: 3/4" x 1-5/8" solid birch
Door frame: MDF/HDF, used to help prevent cracking and warping
Door center: MDF/HDF, used to help prevent cracking and warping
Sides: 1/2" A-grade plywood with wood veneer
Top & bottom (wall): 1/2" A-grade plywood with wood veneer
Bottom (base): 3/8" A-grade plywood with wood veneer
Back panel: 1/2" full back
Shelves: 3/4" A-grade plywood with wood veneer
Base cabinet shelf depth: 1/2
Drawer box: Solid wood 17 mm sides (approximately 3/4") with a 3/8" plywood bottom; 21" drawer length. Dovetail construction with a natural finish.
Drawer glides: Undermount, full extension with soft closing feature
Base corner supports: Wood corner brackets with wood I-beam construction
Overlay: Full with butt doors
Hinges: Concealed, 6-way adjustable with a soft-close feature
Cabinet interior: Matches door finish
Center stile:

No center stile on cabinetry 24"W to 36"W

Assembly method: Pre-installed, color-coated metal clip that won’t tarnish
Finish: Waterborne UV finish
Toe kick: 1/2" plywood (sides of the toe kicks will be unfinished)
Installation rail: Full back
Wall cabinet bottoms finished (exterior): Yes
CARB compliant: Yes
Door hinges: Hinged to the right by default. For wall cabinets, the face frame can be flipped. For base cabinets, unhinge the door, flip it, drill screw holes on the opposite side to re-hinge, and fill the original holes (a touch-up kit can be purchased for this).
Toe kicks included w/base cabinets: Yes
Side panels finished: Yes
Installation/design note: The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.