$35.00
SKU:
Portland-Walnut-Sample-Door
Quantity:
Typically ships within 5-15 Business Days

Portland Walnut Sample Door Overview chevron-down

See the stained finish and slim Shaker profile of Portland Walnut in person before choosing your cabinets.

Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day. All samples are refundable!

Shipping & Returns chevron-down

Product Specifications

The specifications below are for the kitchen cabinet associated with this door sample

Sample door shipping time: Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day
Shop this style in RTA or assembled: Shop Portland Walnut RTA cabinets
Shop Portland Walnut pre-assembled cabinets
Cabinet shipping time:

Shipped in 5-15 business days

Style: Slim Shaker
Face frame: 3/4" Eucalyptus grandis
Door frame: 3/4" Eucalyptus grandis
Door frame width: 25 mm (rails and stiles)
Door center: Eucalyptus grandis veneer on MDF/HDF, used to help prevent cracking and warping
Center panel beveled edge: No
Sides: 1/2" A-grade plywood with wood veneer
Top & bottom (wall): 1/2" A-grade plywood with wood veneer
Bottom (base): 3/8" A-grade plywood with wood veneer
Back panel: 1/2" full back
Shelves: 3/4" A-grade plywood with wood veneer
Base cabinet shelf depth: 1/2
Drawer box: Solid wood 17 mm sides (approximately 3/4") with a 1/2" plywood bottom; 21" drawer length. Dovetail construction with a natural finish.
Drawer glides: Undermount, full extension with soft closing feature
Base corner supports: Wood corner brackets with wood I-beam construction
Overlay: Full with butt doors
Hinges: Concealed, 6-way adjustable with a soft-close feature
Cabinet interior: Matches door finish
Center stile: No center stile on cabinetry 24"W to 36"W
Assembly method: Pre-installed, color-coated metal clip that will not tarnish
Finish: Waterborne UV finish
Toe kick: 1/2" plywood (sides of the toe kicks will be unfinished)
Installation rail: None (there is a full back)
Wall cabinet bottoms finished (exterior): Yes
KCMA compliant: Yes
CARB compliant: Yes
Door hinges: RTA cabinets: Hinged to the right by default. For wall cabinets, the face frame can be flipped. For base cabinets, unhinge the door, flip it, drill screw holes on the opposite side to re-hinge, and fill the original holes (a touch-up kit can be purchased for this). Pre-assembled cabinets: Hinged to the right by default. Use the dropdown options for each cabinet to change hinging from right to left.
Toe kicks included w/base cabinets: Yes
Sides panels finished: Yes
Installation/design note:

The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.